Keystone RV Forums - View Single Post - black water valve replacement 2012 Raptor

**chuckster57** · 09-28-2014, 07:34 PM

Keef95: Welcome to the forums. Your on the right track with your advice. The cardboard protective sheet is called coroplast as is usually held in place with self tapping screws as you describe.

Kenb: once you have gained access to the gate valve, you'll see it is held together with 4 bolts/nuts. Look at the valve where the actuator is and you should be able to identify the brand and type. The seals are replaceable and there are two styles. If it says BLADEX make sure you get those seals. If it doesn't then any replacement in the right size will work.

09-28-2014, 07:34 PM	#3
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,357	Keef95: Welcome to the forums. Your on the right track with your advice. The cardboard protective sheet is called coroplast as is usually held in place with self tapping screws as you describe. Kenb: once you have gained access to the gate valve, you'll see it is held together with 4 bolts/nuts. Look at the valve where the actuator is and you should be able to identify the brand and type. The seals are replaceable and there are two styles. If it says BLADEX make sure you get those seals. If it doesn't then any replacement in the right size will work. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.