Keystone RV Forums - View Single Post

**chuckster57** · 09-09-2019, 04:15 AM

You will still need a capture plate. There are different ones for different pin boxes. If your current plate uses the Allen that hits the rear of the kingpin there is a fix.

Per our rep: find the contact point on the kingpin and drill a VERY SMALL dimple for the Allen screw to hit.

09-09-2019, 04:15 AM	#39
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,357	You will still need a capture plate. There are different ones for different pin boxes. If your current plate uses the Allen that hits the rear of the kingpin there is a fix. Per our rep: find the contact point on the kingpin and drill a VERY SMALL dimple for the Allen screw to hit. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.