Quote:
Originally Posted by Festus2
Not sure about your unit but when I am connected to shore power, the monitor (Battery) always reads "Full" - no matter what the actual charge on the batteries is. If the batteries go down to say 75% charge and I am not plugged in, the monitor will read 3/4 full. As soon as I hook up to 110v, the monitor will read fully charged even though the batteries have not yet reached their fully-charged state.
You might want to take a hydrometer and check the SG in the 6v's while you are taking a reading with a voltmeter (should have some kind of load on the batteries).
|
With the 12v batteries it has always read Full when plugged in also..Now with the 6v, it reads E.
I am 1/2 tempted to just put 12v back in and see if that solves the issue. The one thing that is puzzling me is why did my 12v batts go completely dead in just 2 months after using it. I am gonna have to do some digging to make sure nothing is left on anywhere.