View Single Post
Old 04-10-2017, 08:28 AM   #1
WarEagle
Junior Member
 
WarEagle's Avatar
 
Join Date: Dec 2016
Location: Atlanta
Posts: 10
Question Progressive Industries EMS-HW50C E2 error message

Ok, picked up my camper and took it to its permanent setup location.

We had an issue with the EMS-HW50C and I needed some feedback . I put the EMS in bypass mode so I could get power temporarily.

We were getting the E2 error message which is an open ground issue. I have a inverter installed for the Samsung fridge. Currently the inverter is turned on; however I have shore power plugged in.

Could it be the fact that the inverter is powered on? Should the inverter be turned off? We will be leaving food in the fridge and I am worried in the event of a surge that the food will go bad.

Or is it that the installer did not install the EMS-HW50C correctly due to the inverter?

Or could it be that I need to call the power company to review my power box for an issue?

THANK YOU FOR ANY FEEDBACK!!!
__________________
2017 Alpine 3401RS
2016 Camp Inn 560 Ultra Teardrop
WarEagle is offline   Reply With Quote