Quote:
Originally Posted by slow
Are your stand-off brackets not slotted to allow the cable to find its sweet spot? Mine are. It is just that there is not enough slot to go outward any more.
It also sounds like your cables are routed the opposite of mine. Or are you having issues with the cables that pull out the slide? My "pull to retract" cables are inboard are are wearing the frame. My "pull out" cables inside the TT are OK.
|
My stand-offs are slotted. At least one cable on each side is rubbing the jamb. The cables that are hitting on the jamb are the ones labeled out (red and purple). I have not removed any seals outside the TT to see if they are hitting there too. I've physically moved the cables over to see if it helps. I've not operated the slide since then. I wonder if I could put something in the slots to hold the cables in place.
Sent from my Nexus 7 using Tapatalk