Quote:
Originally Posted by Tbos
In my case the cables are too far outward from the side of the slide. No way to change the brackets to move the cables in.
|
Are your stand-off brackets not slotted to allow the cable to find its sweet spot? Mine are. It is just that there is not enough slot to go outward any more.
It also sounds like your cables are routed the opposite of mine. Or are you having issues with the cables that pull out the slide? My "pull to retract" cables are inboard are are wearing the frame. My "pull out" cables inside the TT are OK.
__________________
2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride)
2015 F250 XLT SB Crew, 6.2l gas
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|