Keystone RV Forums - View Single Post

Kitesurfer · 07-27-2017, 03:57 PM

New owner of a 2400BH. I noticed that the backside fiberglass was HOT/very HOT to the touch above the exhaust. I couldn't keep my hand on it. I didn't have an IR gun to see what the temperature was. Anyone have this issue or is this completely normal? It seemed to look fine when I opened up the black cover. For a temporary heat diversion, I placed some aluminum foil behind the black cover and diverted it away from the camper... completely normal then... but not optimal.

07-27-2017, 03:57 PM	#1
Kitesurfer Junior Member Join Date: Jun 2017 Location: Davidsonville Posts: 5	2400bh HW Gas Exhaust HOT on back panel New owner of a 2400BH. I noticed that the backside fiberglass was HOT/very HOT to the touch above the exhaust. I couldn't keep my hand on it. I didn't have an IR gun to see what the temperature was. Anyone have this issue or is this completely normal? It seemed to look fine when I opened up the black cover. For a temporary heat diversion, I placed some aluminum foil behind the black cover and diverted it away from the camper... completely normal then... but not optimal.