Quote:
Originally Posted by JRTJH
Your wheels are the same casting for the 5 lug (65PSI) and the 6 lug (80PSI) rating. That means the valve stem hole size is the same for either rating, since the casting is the same.
As for maximum torque on the valve stem to prevent gasket damage, I'll leave that to the "experts at the tire installation facility"
I believe that you're making this a LOT more difficult than it should be.
|
Right you are, as is the case with me, I tend to over research things.
On another note, we brought our camper home to do a little work on it and I crawled under to see what it says behind the 6 lug wheels.
It says:
MAX LOAD
2150&6/2830LBS
So just to be sure, these wheels are 80 psi rated?
Any idea what 2150&6 means?
EDIT: NVM, I figured it out.
.