View Single Post
Old 09-09-2020, 08:24 AM   #25
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,836
Quote:
Originally Posted by Csmccharlie View Post
So Im starting to look into this as well and wanted to double check with the pros in here.

Would I pull the fitting circled in red at the water pump that pulls from the water storage tank and hook the hose up to siphon from the gallon jug.

Or the fitting circled in blue
You would "pull the fitting circled in red" and connect the suction fitting/hose that is in the gallon jug of antifreeze.... Don't worry about "hooking it up wrong, if you hook your "suction fitting to the supply side of the water pump, if the fresh water tank is empty, you'll only blow bubbles into the antifreeze jug. If the fresh water tank is full (or has enough water remaining to deliver water to the pump, you'll know as soon as you turn on the pump because the antifreeze will "grow in the jug".... Anyway, attach your suction fitting to the red port. On top of the pump head, you should see a "molded arrow" pointing "INTO" the pump. The outlet side as a "molded arrow" pointing "AWAY" from the pump... The arrows aren't easy to see, especially when you're standing on your head, using a flashlight to see the pump.....

ADDED: When you get ready to pull that fitting circled in red, BE SURE YOUR FRESH WATER TANK IS EMPTY... If there is water in the tank, gravity will "flow water" all over your trailer through the tank supply hose that's connected to the fitting.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote