Keystone RV Forums - View Single Post

**chuckster57** · 02-14-2018, 06:44 PM

If your unit has the housing mounted on the rear cap, the power wiring will be inside it. If not and you buy the “kit”, it comes with the housing and power wiring. One end will have 2 wires stripped back a little bit, one red (12V positive) and one black (12V negative). The other (camera) end has a plug that the camera pigtail plugs into.

Most common power feed is as stated above, center marker light. For a time, Grand design was wiring it to the battery at the junction box of the umbilical cord.

02-14-2018, 06:44 PM	#8
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,343	If your unit has the housing mounted on the rear cap, the power wiring will be inside it. If not and you buy the “kit”, it comes with the housing and power wiring. One end will have 2 wires stripped back a little bit, one red (12V positive) and one black (12V negative). The other (camera) end has a plug that the camera pigtail plugs into. Most common power feed is as stated above, center marker light. For a time, Grand design was wiring it to the battery at the junction box of the umbilical cord. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.