Quote:
Originally Posted by Crossfired
I recently installed Haloview MC7108 backup camera system and used a very basic Ram Mount so it's adjustable. I secured it with 4 #8 SS self-drilling screws and sealed the 4 holes with a dab of Dicor in each hole. To cover the factory hole I put a piece of 4" wide Eternabond tape over the factory hole where the power wire came out. Took all of about 10 minutes and she's all sealed up and water tight. Works and looks great too.
|
Should've mounted it below the clearance light! While driving at night all you're going to see is a red glare from that clearance light.