Keystone RV Forums - View Single Post

slow · 07-16-2017, 04:32 PM

I ended up going the solder route and am happy with the result.

Here are a few pictures of the steps I took based on searching the internet for automotive wiring splicing:

The 8th fuse slot was made available and is now used for the power (solid red colour wire fourth from the bottom) via a relay for the rear observation camera. I turn the camera on by turning on my driving lights.

07-16-2017, 04:32 PM	#6
slow Senior Member Join Date: Jan 2014 Location: Winnipeg, Canada Posts: 1,196	Splicing into 12V dc Circuit I ended up going the solder route and am happy with the result. Here are a few pictures of the steps I took based on searching the internet for automotive wiring splicing: The 8th fuse slot was made available and is now used for the power (solid red colour wire fourth from the bottom) via a relay for the rear observation camera. I turn the camera on by turning on my driving lights. __________________ 2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride) 2015 F250 XLT SB Crew, 6.2l gas PullRite 16K SuperGlide w/SuperRail Reese 5th Airborne (bagged) Pin Box RoadMaster Shock Kit X-Factor Cross Bracing