Keystone RV Forums - View Single Post - Locating Coaxial Splitter in 2012 Keystone Outback

**JRTJH** · 06-19-2017, 05:01 PM

Welcome to the forum and congratulations on your "new to you" 27RKS. We have a 2014 of the same model and think it's great for what we need and want.

As for the plate with the two connections and the jumper cable. That is your satellite connection. Remove the jumper, the bottom (usually, unless someone turned things around) is the output from the satellite dish to the receiver and the top one goes from the receiver back to the trailer distribution system. To operate on satellite or cable, the "booster power switch" must be off (little red or green LED on the TV booster) and to operate on "over the air antenna" the booster power switch must be on.

06-19-2017, 05:01 PM	#9
JRTJH Site Team Join Date: Mar 2011 Location: Gaylord Posts: 26,997	Welcome to the forum and congratulations on your "new to you" 27RKS. We have a 2014 of the same model and think it's great for what we need and want. As for the plate with the two connections and the jumper cable. That is your satellite connection. Remove the jumper, the bottom (usually, unless someone turned things around) is the output from the satellite dish to the receiver and the top one goes from the receiver back to the trailer distribution system. To operate on satellite or cable, the "booster power switch" must be off (little red or green LED on the TV booster) and to operate on "over the air antenna" the booster power switch must be on. __________________ John 2015 F250 6.7l 4x4 2014 Cougar X Lite 27RKS