Quote:
Originally Posted by Maineiacs
Revrusty, turns out this is a Suburban heater. No plug behind the switch. Must be hard wired. Thanks for the suggestion though.
|
If you have a switch on the lower left corner on the outside, then you should have a cord that plugs in. You will have to access the back side of the water heater, like getting to the bypass valves.
The Atwood’s are hard wired, because there isn’t a switch on the water heater and the switch you turn on is a 12V relay behind the tank.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.