|
I went to E trailer with my truck and 5th wheel and they had two guys look at it. They measured the trailer to see if it was level. They measured from the strip of trim that runs the length of the trailer. It was only 1 1/2 inches too low at in the back. They suggested that if I could lower the pin box one hole down, it should be right on. It will still have the 6-inch space from the trailer to the bed rails.
I had measured from the bottom of the skirt or trim which was not the right place. I feel much better knowing I will be pulling the trailer with the correct balance.
Thanks, Jim
2019 ram 3500 diesel Aisin and 4.10 gears dually long bed
2019 Keystone Cougar 361rlw
|