Keystone RV Forums - View Single Post - Where are wall studs in my 2012 Outback trailer

SummitPond · 08-18-2017, 03:58 PM

I suspect others (Chuckster, John, ...) more than likely can provide more detailed information on what I'm about to say.

We took a tour of the factory for our model line this spring. Never got to see inside the rear end, but the front of the trailer has no vertical studs at all - there are aluminum (?) or galvanized (?) metal strips that are used to mount the various internal hardware using screws. I've attached a photo so you can see what I'm talking about.

Perhaps the hung rear is constructed in a similar fashion?

08-18-2017, 03:58 PM	#6
SummitPond Senior Member Join Date: Jan 2015 Location: Northeast Florida/Southeast Maine Posts: 784	I suspect others (Chuckster, John, ...) more than likely can provide more detailed information on what I'm about to say. We took a tour of the factory for our model line this spring. Never got to see inside the rear end, but the front of the trailer has no vertical studs at all - there are aluminum (?) or galvanized (?) metal strips that are used to mount the various internal hardware using screws. I've attached a photo so you can see what I'm talking about. Perhaps the hung rear is constructed in a similar fashion? Attached Thumbnails __________________ Now: 2019 Winnebago 2500FL w/e2 WDH;Sold: 2015 Bullet Premier 19FBPR (shown) 2012 Ford F-250 Lariat Super Duty Crew Cab (gas 6.2 L, 3.73 gear ratio 2WD, 172" WB)