Quote:
Originally Posted by mfstrohl
We just bought a new raptor velocity. It has a keyless entry with no instructions. The keypad has two numbers on each button and it does not have a fob. Does anyone have any idea how to use it and set it. It is driving me crazy.
|
Changing the User Code
The unit is shipped with a default user code of 1234, but can be changed to a 3-7 digit number. To change the user code:
1. Press the 9·0 button for approximately 3 seconds. Keypad lights should flash twice then stay on.
2. Enter the current user code. When entering the last digit of the current user code, hold the button for approximately 2 seconds. Keypad lights should flash once then stay on.
3. Enter the new user code. When entering the last digit of the new user code, hold the button for approximately 2 seconds. Keypad lights should flash once then stay on.
4. Repeat the new user code. When entering the last digit of the new user code, hold the button for approximately 2 seconds.
5. Keypad lights should flash once then turn off. The user code has been successfully changed.
If the keypad lights turn off during Steps 1-4, then programming has been timed out and the process needs to be repeated from Step 1.
__________________
2007.5 Chevy Duramax 2500HD
2012 Keystone Avalanche 343RS, 5500W Onan Generator
JT Strong Arm Stabilizers, Trailair Tri Glide Air Ride Pin Box, Curt 20K Slider Hitch, Firestone Dual Air Ride System with Load Lifter Air Bags, Tri-Metric Battery Monitor System, Power Max PM4B-75 Boondocker Converter/Charger, Replaced 2-12volt batteries to 2-6V Trojan T106 batteries, replaced all 921 light bulbs with LED's.