Keystone RV Forums - View Single Post - EMS-HW50C Generator Problem

Ddubya · 03-06-2018, 05:46 AM

Merln B is correct about turning off the EMS when using an Invertor/generator. There is no reason to use the EMS unless you are plugged into shore power. The EMS is to protect against improper or defective wiring from shore power.
So turn off the EMS when using the generator but make sure it is back on when you plug into shore power.

03-06-2018, 05:46 AM	#19
Ddubya Senior Member Join Date: Oct 2016 Location: Sherman Posts: 326	Merln B is correct about turning off the EMS when using an Invertor/generator. There is no reason to use the EMS unless you are plugged into shore power. The EMS is to protect against improper or defective wiring from shore power. So turn off the EMS when using the generator but make sure it is back on when you plug into shore power. __________________ 2017 Alpine 3401RS,Titan Disc brakes,Morryde SRE 4000, 2016 Ram 3500HD Laramie SRW,LWB,4X4, Aisin transmission