View Single Post
Old 03-23-2014, 08:55 AM   #10
Steve S
Senior Member
 
Join Date: Oct 2013
Location: B.C
Posts: 1,399
K here's what happened this morning.
First off the big TV is the 2' from the main box, the small TV is in the bedroom.
One thing I forgot to mention is that the small TV is 12 volt.
So both TV's are on, same channel. I turn the 120 portable heater on from dead cold and the main TV flickers and no signal but the small TV stays on. The main TV doesn't loose 120 power at all it just turns blank.
I unhooked the surround and the bluray from the wall outlet that the main TV is on and nothing changes.
I turn off the the 120 heater and the main TV fires up, all along the small TV never fails.
K now I take a shower, the WH is running and the TV dies but only when the furnace kicks in.
At one point I had both TV's hooked in to the same outlets, split with the ant cable and the main TV would do the same thing.
I've checked all the connections at the ant box and all looks fine.
K now here's another thought; if I hooked the main TV to 12 volt do you think this might make a difference?
__________________
2010 Keystone Cougar 25 RL.
Steve S is offline   Reply With Quote