Keystone RV Forums - View Single Post

hankaye · 03-23-2014, 05:59 AM

SteveS, Howdy;

check ALL the coax connections, that means pull the wall plates
out and check the ones behind them as well. generally the judicious
use of a 7/16" wrench to snug the connections (finger tight + 1/2 of a flat),
You should also get up on the roof and check the connections at the antenna as well.
I found the vast majority of mine were only turned on to the connections
a few turns, no where near tight.
Good luck.

hankaye

03-23-2014, 05:59 AM	#7
hankaye Senior Member Join Date: Apr 2011 Location: Arrey, Posts: 2,368	SteveS, Howdy; check ALL the coax connections, that means pull the wall plates out and check the ones behind them as well. generally the judicious use of a 7/16" wrench to snug the connections (finger tight + 1/2 of a flat), You should also get up on the roof and check the connections at the antenna as well. I found the vast majority of mine were only turned on to the connections a few turns, no where near tight. Good luck. hankaye __________________ Striving for a less complicated life since 1949 ... Home: 2008 Cougar 278 RKS T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550) Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.