Keystone RV Forums - View Single Post

**chuckster57** · 03-19-2023, 06:34 AM

Don’t remove any trim on the exterior. Extend the slide about 6 inches and then use a ladder to inspect the outside seal.

Remove to top INNER facia, then extend the slide about 3/4 of the way out. The top layer is held on with brads and the bottom layer is held on with squarehead #2 screws. Make note of the position of each piece.

03-19-2023, 06:34 AM	#21
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,319	Don’t remove any trim on the exterior. Extend the slide about 6 inches and then use a ladder to inspect the outside seal. Remove to top INNER facia, then extend the slide about 3/4 of the way out. The top layer is held on with brads and the bottom layer is held on with squarehead #2 screws. Make note of the position of each piece. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.