If I remember right that refer was made by Atwood, bought out by Dometic and they basically quit making them.
You need to do some testing with a Volt/Ohm meter. Your looking for 12VDC at the control board. Then there are 2 fuses on the board, test them for continuity. If you have that then come back for further instructions.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|