Quote:
Originally Posted by DavidAndDonna
What would be the downside to just weld tubes to the spring hangers rather than bolt?
I see the X-Factor bolts atop of the spring hanger and the main stress of the hanger is the bolt running thru spring, which is below.
Seems a tube welded solid to the spring hanger would be an easier and faster mod?
seems one could cut out the bottom of the tube wall to access the spring hanger bolt.
Your thoughts?
|
My first thought would be that once you welded the braces to the hangers you would have to cut them off to replace or repair anything above them such as holding tanks.
Just a thought...