Quote:
Originally Posted by Bob Landry
How is power figured on a converter? For instance, a 45W converter, if it's figured on output, would only be putting out a little under 4Amp at 12V. Am I looking at this correctly?
|
Yes, if I had a box with a rating of 45W. I would assume it was the OUPUT rating and if box was 12Vdc output then yes little under 4 amps outpuT. MOST converters I have seen were rated based on AMPS (exp 45A) out. With under 4amps achievable with a simple output diode bridge.
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder 
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran 
PSU (GO LIONS) 
|