Quote:
Originally Posted by jregalia11
Thank you for responses. I did actually speak with tech support and he verified that if the gas valve is opening the. That proves the sail switch and limit switch are both doing as they should.
In my case the gas valve is opening and no spark. In my case he mentioned that if you take the orange wire off of the connector on the board and hold it 1/8 inch from the connector you should see spark. If not then it’s a failed board. Everything else is proving in my case and maybe just a DOA board. Will update it after I replace the board.
|
DON'T DO THAT HOLDING THE CONNECTOR IN YOUR BARE FINGERS while wearing damp socks...…
