Quote:
Originally Posted by Steveo57
I hope these are not all lessons learned from your project! [emoji16] Anxiously awaiting to see how things look when your done.
|
Some were reminders that I had put out of my mind, since I've not done any major pipe runs for quite some time. The labeling tip came from my experience of grabbing two wrong pipes as I hurried to get more done before the thunder that I was hearing became the downpour, ten minutes later. Again, the four inch shortage on the two cross pieces should not be too big a deal as long I adjust the final few cross pieces running to the back of the shelter. I did not have the two short pieces opposing each other, so the longer, correct cross pieces should help even things out. I'll know, by next Wednesday. If worse comes to worst, I can cut the short pieces in the middle and insert a regular coupling with a short piece of pipe and then a repair coupling to even the 5'8" to the correct 6'.