|
Your unit should have come with 2 flexible hoses(or 1 for each s/o you have) to attach to the shaft on the side of the motor. To get to the motor, 1st Remove the cover on the top center of the s/o fascia covering the motor (Usually has 2 or 4 screws covered with plugs) than put the female end of the hose onto the shaft and the other end into a drill to bring the slide out IN or OUT. Becareful depending on your model trailer the top of the slide out may be to close the the ceiling of the trailer and you can get "pinched" between the two. Hope this helps if you need more help let me know. Good luck
|