Quote:
Originally Posted by chuckster57
Just make sure the battery is FULLY charged. GC3.0 doesn't like low voltage and you will get errors if the voltage drops below 12.0 for even a nano second. How do I know this? I spent 2 1/2 hrs on the phone with an LCI tech chasing an "auto level fail" message, changing components and using a volt/Ohm meter while operating the system. 12.7V on the display and your pushing it.
|
And you end up buying a new controller/screen for $200+ as I did this past February after I installed the new series 27 battery. Don't let the voltage drop below 12.7 and use the push button pad...