Quote:
Originally Posted by PhillyPhan
The valve is opening and closing fine when pushing/pulling the handle. It just looks like the valve is leak by internally. Was this what you were seeing? If so, you just put cooking oil down the toilet and open/closed the valve a few times and it started sealing correctly again? Just want to make sure you had the same issue before I try it.
|
My valve was difficult to pull out and push in. It wasn't closing completely. The cooking oil lubed it so that it was much easier to operate and close completely.
So, doesn't sound like the same issue, but you might try just in case yours isn't closing entirely. Much easier than replacing the valve.