[sourdough]

The BXW 1200 is a wdh only. It requires the little friction add on bars for any kind of sway control. I've used that type of sway control and it is inadequate at best. The good part is that you have a smaller trailer. At that time mine was around 25' bumper to ball and with 2 of the little "sway control bars" it was not up to the task. There are better wdh/sway control units out there but they cost more and I don't know that they are needed for a trailer your size. Get the addons and tighten it up, you will probably be OK.