|
Thanks i will check that out.
I checked the camber by placing a 4 foot level flush on the upper portion of the right front tire and seeing if it butted up flush with the back tire.
Found there was 1/4 gap.
Checked the bottom and it was the same 1/4 inch gap. (So no negative camber)
Then i did the same on the left side. Found the left rear tires stuck out 1/4 of an inch. (As if everyrhing is shifted towards the driver's side by 1/4 of an inch)
Also found when measuring front of hub to front of hub rhere is a 1/4 inch difference.
Forgive the crude drawings
|