View Single Post
Old 11-02-2018, 03:55 AM   #8
Javi
Senior Member
 
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,456
Most of those regulators like the Camco will vary pressure based on incoming pressure.. If you set it to 40 psi with a 45 psi input and then the pressure rises to 70 psi the output will usually increase as well.. Found this out the hard way and quit using the less expensive type of regulators..

I now use and recommend the Watts 263A regulator used by professional plumbers... no fuss, no muss..

One hint... never set the regulator under 45 psi... and if you aren't getting enough input pressure to deliver 45 psi.... don't fiddle with the regulator
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
Javi is offline   Reply With Quote