Quote:
Originally Posted by LabRat
I think it has to do with water pressure and possibly coupled with a loose fitting. The main clue is that the problem goes away when you use water which reduces the pressure. The regulator you are using maybe allowing the pressure in the lines to slowly creep up when there is now water usage. It is had to tell without a pressure gauge.
|
I had a similar problem once and started with too much pressure,, after that even with a regulator I would only turn water on outside a turn or a little more,, then go in and check pressure, if it was enough would leave it alone,, if not give it another 1/4 turn and so on