|
I have 4 lights in the front of my Fuzion. One small one right above the king pin. 2 round ones on each side in the lower part of the cap, and one LED strip up high on the cap between the clearance lights.
On my Fuzion I have replaced the 2 round lights in the middle of the cap with LED's. If thats the light you are talking about you just have to remove the metal trim ring, by turning it counter clockwise. Then you can get your fingers on the glass lens and also turn that counter clockwise exposing the bulb. If its easier after you remove the trim ring you can remove the 3 screws and take the whole light assembly out of the cap and twist off the glass lens then.
|