|
Soft spots in the floor around the vents
We just bought a 2010 Outback 210RS and I have the same problem. I removed the vents and the boots and found that when they were cutting the floor to allow for the vents they used a skill saw. So instead of a nice clean cut rectangle, they cut past the corners and that is where the floor begins to de-laminate. It is clearly a manufacturing issue. If they had used the appropriate tool for the job, there may not have been any issues. I plan on removing the liner on the bottom and adding aluminum supports. I was very disappointed to find this from what seems to be a well built camper.
|