Thanks guys.
No luck tightening from the inside. All screws were intact. I found a couple that were loose, but not enough to make any difference when tightened. When I removed the shade to access all the screws, I did notice a portion of the upper frame is distorted/bent - like someone really tightened the hell out of it. I'm starting to think it was a poor fit from the get go and that was the factory's attempt to 'make it fit'.
Looks like I will go the ProFlex/ProSeal route.
" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350">
__________________
2022 Rockwood Signature 8324SB
2019 F350, SRW, 6.2L, 4.30 gears
Sold: 2020 Keystone Cougar '1/2 ton' TT, 29RLKWE
|