Quote:
Originally Posted by Dana Bethany Julia
Thank you. Where is this screw
|
It's located on the end of the pump head, behind a plastic plug. BUT: I've never seen one that needed adjustment. Either they work or they don't. If you're going to "adjust it anyway" remember that 1/4 turn at a time is the recommended procedure. And, also remember that once you start "tweeking it" you won't really know what the pressure setting is, could be going up in pressure or could be going down in pressure, depending on whether you're in front of the pump or behind the pump... Clockwise is the opposite direction, depending on where you're standing..... And, if the screw falls out in your hand, a new pressure switch, if you can find one, was $28 the last time I ordered one. Probably double that now. A new pump is about $60, so the switch may cost as much as a new pump.
So, some thought about what you're doing if you're going to jump off the deep end..... YMMV