Quote:
Originally Posted by Customer1
Thanks all for your input, I turned the LCI jack head yesterday and it was a piece of cake.
By clipping a couple cable ties I had enough slack in the wires to lift the head free of the post. I tapped threads in the holes that were already existing and put everything together using the original bolts but with the head turned to the side. I gained 3.5 inches with the mod.
I didn't notice anyone above mention this but the bolts had blue threadlocker on the threads. When installing the bolts with the head in the new position, I put a generous amount of blue Loctite on the bolts to insure they don't loosen.
|
I did the same, just forgot to add that to the steps. That is almost a given for most bolts and nuts on the trailer.