Quote:
Originally Posted by mlk1950
I use the screw jacks on the front and blocks under the scissor jacks on the back. I run them down til they touch, then add a little on the back and same thing on the front, only up. Really helped mine.
|
If you have manual scissors jacks, to make setup a little bit easier, if you lower the tongue about an inch, then run the rear scissors jacks "tight" but don't force them, then when you raise the tongue, it will put weight on the scissors jacks. It does the same thing as "cranking the jacks tight" but saves a bit of "sweat" on a hot summer day.