I've read all of the threads I can find about this issue and I still can't wrap my head around installation of this router into the pre-cut hole in the ceiling of my Outback. Inside the hole, behind the plastic plate are the coaxle cable which I assume goes to the TV and the three small wires (green, red and yellow) masking taped around the coaxle. No power supply (described in the Router installation instructions). Supposedly a plug and play device, the alternate instructions are to create my own power supply. Fishing inside the hole, I come up with a long piece, tied in a loop, of the green and white 12V power wire. According to the wiring specs (Keystone) this is the power source for the interior lights.
I'm really not trying to sound ignorant, but I'm not an electrician and can't "make my own power cord/supply". We have a mobile RV repairman here and he can't make head nor tales of it either.
I guess I'll have to return the router and forget the entire thing if we can't figure this out.
Another little piece of misinformation from the dealer. Plug and play. Right.
