[flybouy]

Originally Posted by mosherb

I have the above unit with 3 hydraulic slides. Since new in 2012, when I extend or retract the slides and have to continually press the switch to get the slides to move. The solenoid clicks but it takes a long time to have the pump start. Hooked to power and to a bettery. What is the issue?

Battery could be defective, it takes a strong battery and shore power to operate the slides. Also could be the auto resetting 12v breaker. Some slide motors on hydraulic slides were originally installed with a a breaker that was too low an amperage and it will trip, then automatically reset.