Quote:
Originally Posted by jasin1
may be a loose neutral wire ….for instance if you touch the pos lead of tester on the breaker hot wire and touch the other on the neutral buss and hit a loose wire for that breaker you may be pushing it tighter and voila you have a good hot and neutral connection now for that circuit..that would explain the spark also
make sure the breaker is snapped in tight also to the buss bar
|
I checked all the wires I did find a couple loose on the negative bus tightened everything replaced the breaker same results I am going to try and attach a photo so y’all can see what I mean red lead on breaker black lead on negative bus and I have power