Keystone RV Forums - View Single Post

cdigger67 · 03-23-2023, 06:10 PM

Hi guys. 2018 Outback 330RL. BAL 7.3 Leveler. Went to readjust my stabilizers. Opened the cover and the screen would not turn on.
Checked all the fuses at the main panel. All good. Checked for power at the connector just below the control unit. No power to that. Wiring then routes under the trailer and into Coroplast. I also checked the 2 red breakers located on the frame near the battery. They both have power on both sides. Maybe a fuse or breaker I'm not aware of.

03-23-2023, 06:10 PM	#1
cdigger67 Junior Member Join Date: Feb 2021 Location: Phoenix Posts: 27	Bal 7.3 leveler Hi guys. 2018 Outback 330RL. BAL 7.3 Leveler. Went to readjust my stabilizers. Opened the cover and the screen would not turn on. Checked all the fuses at the main panel. All good. Checked for power at the connector just below the control unit. No power to that. Wiring then routes under the trailer and into Coroplast. I also checked the 2 red breakers located on the frame near the battery. They both have power on both sides. Maybe a fuse or breaker I'm not aware of.