|
In your second photo (the one with the slide ram visible), go to the left of the photo and you'll see a rubber seal/flap. Pull that down with your fingers and use a flash light to look in that space. You'll see a plastic/glide/bumper about 2 to 3 inches beyond the rubber seal/flap.
That is the "wear guide/wear bar" on which the slide bottom rests when being extended/retracted. If there are rollers, they will be "at the same location as the seal/flap. There will be either two or three rollers about 5" long and about 1" in diameter upon which the slide darco bottom "rolls on as the slide moves in or out".
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|