[campingcpl]

When we switched from or GMC 1/2 ton 2 wheel drive to the Chevy 3/4 ton 4x4 I had to readjust the hitch. I had to lower the head and readjust the angle. The bumber sat higher and with heavier suspension I didn't need as much angle in the head. Very rarely will you find you can take a hitch from one truck to another and not have to make some type of adjustment and that even goes when switching from trailer to trailer or even changing the load in a current trailer.

For example: I might have to adjust the leveling bars if we are going on a long trip compaired to a short trip. The reason being we will have more clothes loaded in the closets, extra water in the fresh water tank (short trips wouldn't require putting water in the fresh water tank), etc..