Keystone RV Forums - View Single Post

JetPilot · 11-18-2010, 08:07 PM

Hi folks!

Given the issues that we've had with our new 2011 Keystone Alpine, I thought that I could both share my lessons-learned as well as learn from you all. To start the intro, let me just say that the overall design/engineering of the Alpine is very favorable in most cases; unfortunately, the workmanship & lack of quality control borders on criminal: we have found screws drilled through the kitchen pantry into PEX water lines (causing a massive water leak that drained into the belly), furnace vents left unhooked and lying next to the furnace body (no wonder there was no heat to the rear vent of the trailer), and numerous other installation problems too numerous to mention here (although I will warn new owners that they should re-tighten all water drain fittings, re-caulk the shower install, expect a leak in the fresh water flimsy fill line [have this replaced with a high quality flex PVC line ASAP], and protect your electric brake wires with flex conduit to prevent chaffing on the leaf springs). OK, enough from me for now...look forward to learning from you.

11-18-2010, 08:07 PM	#1
JetPilot Junior Member Join Date: Nov 2010 Location: Las Vegas Posts: 2	Newbie to Forum...2011 Alpine owner Hi folks! Given the issues that we've had with our new 2011 Keystone Alpine, I thought that I could both share my lessons-learned as well as learn from you all. To start the intro, let me just say that the overall design/engineering of the Alpine is very favorable in most cases; unfortunately, the workmanship & lack of quality control borders on criminal: we have found screws drilled through the kitchen pantry into PEX water lines (causing a massive water leak that drained into the belly), furnace vents left unhooked and lying next to the furnace body (no wonder there was no heat to the rear vent of the trailer), and numerous other installation problems too numerous to mention here (although I will warn new owners that they should re-tighten all water drain fittings, re-caulk the shower install, expect a leak in the fresh water flimsy fill line [have this replaced with a high quality flex PVC line ASAP], and protect your electric brake wires with flex conduit to prevent chaffing on the leaf springs). OK, enough from me for now...look forward to learning from you.