PDA

View Full Version : Sewer Solution storage


snfexpress
01-02-2013, 12:54 PM
On our previous 2006 3400RL, Keystone had put in a storage door in the left rear fender. Our Big Sky didn't have one, so we added one...

http://www.keystoneforums.com/attachments/photobucket/img_59828_0_85555f3a79edfb4b67fda138e7daaf63.jpg

f6bits
01-02-2013, 03:44 PM
What's inside the door? All this time, I've been thinking I should add a long storage tube, but I'm not against coiling up my hose if it'll fit in something like that.

snfexpress
01-02-2013, 03:51 PM
Nothing but some wiring for the taillights and a couple of our things. I tie wrapped and put them in that black plastic covering to protect them. There is a lot of space in there. We would have put one on the curbside, but that is where our rear stabilizer jacks switch is mounted.

The hardest part is the I initial drilling and cutting. If you remove the fender screws from underneath, you can get a pretty good idea where to start. Also, we used stainless steel bolts, rather than screws with sharp metal points, to secure the storage door.

f6bits
01-02-2013, 04:00 PM
Is that door an entire compartment setup? A picture with the door open would help. What are the dimensions of the storage compartment?

fred1609
01-02-2013, 09:41 PM
That is a great job, but can you give us a picture with the door open?