PDA

View Full Version : television removal 2011 bullet


haffcke
11-20-2012, 03:04 PM
my 19 inch tv in my bullet needs repair and i would like to remove it myself, i have removed the mirror from the rear of tv and can see it's mounted to a bracket of some kind but can't figure out how to get it off the bracket, anyone please. thanks Phil

KJcachers
11-20-2012, 08:24 PM
Mine just lift right off the bracket. The plate on the back of the TV is v shaped and settles right into bracket. No screws to hold it in place


Sent from my iPhone using Tapatalk

cjm
11-20-2012, 11:53 PM
mine bolted directly to the bracket. Bit of a pain to remove. See if there are 4 small bolt heads on the bracket.

haffcke
11-21-2012, 01:40 PM
CJM, I see two screws that look like they might be holding the tv to the cabinet and will try to remove them to see what happens. thanks Phil

haffcke
11-21-2012, 01:42 PM
Mine just lift right off the bracket. The plate on the back of the TV is v shaped and settles right into bracket. No screws to hold it in place


Sent from my iPhone using Tapatalk

tried lifting but maybe need to try harder, thanks Phil

Englishman
11-22-2012, 06:26 PM
If you have a mirror on the back side of the tv then you will need to remove the mirror. Once the mirror is removed you can get to the two screws holding the tv on the bracket.

Good luck.

Sent from my SPH-P100 using Tapatalk 2