sewer hose

[novakain]

I take delivery on a 2013 raptor and noticed there isnt't a storage space for the sewer hose? The dealer is even dumbfounded.

[f6bits]

Storage tub or a storage tube mounted underside. What storage space were you expecting? Some people store them in the bumper, but that's just asking for rust and hose abrasion.

[SteveC7010]

I take delivery on a 2013 raptor and noticed there isnt't a storage space for the sewer hose? The dealer is even dumbfounded.

Very common these days. The square steel bumper is useless for that because the inside rusts right away and becomes very abrasive to the hose.

I use a plastic tote bin. Others buy commercially made storage thingies for stinky slinky. Still other folks will fabricate up their own. Do a search here and you'll find some other ideas.

[novakain]

There are no bumpers on this hauler. I guess you need to make your own? Dont get much for $60000 anymore i guess.

[slowGTO]

We got one of these and mounted it in a compartment.... works really well. come with clips that I put to the underside of the front compartment and the end caps keep anything from leaking out....

http://www.campingworld.com/shopping/item/easy-slip-travel-pack-20/18594

[randy69]

I believe it was 4" black PVC , 2 rubber end caps and 2 4" Pipe Straps. You can get all of these at a home depot. Except for the Pipe Straps. Go to a electrical place that sells this. Cut abs pipe to fit just past your frame (side to side) I drilled and mounted Pipe Straps on inside of frame. Put end caps on each side for access on both sides. Also drill a small hole in the middle of each end cap. This is for pressure to equalize in the PVC while your traveling in high or lower location. Now you can store up to 40" foot of sewer hose. I have done this on my old 21' fleetwood prowler now on my 39' raptor. This was installed underneath by the spare tire Will post a pictures.

[f6bits]

I'm thinking that it's just not feasible to put a bumper on a toy hauler since the rear wall opens downward. Considering how flimsy trailer bumpers are, they're only good for holding a spare tire, and even that's pushing it. I doubt they're of any use in an accident.

[jje1960]

I've been using the bumper on the SRX, thinking next spring I'll do the plastic tube, looks pretty neat.

[rnkburg]

My 2012 didn't have a spot either and the area where the handles are looks line its supposed to hold something but its too small

Sent from my EVO using Tapatalk 2

[Me.Bikes.Dogs]

My 2012 didn't have a spot either and the area where the handles are looks line its supposed to hold something but its too small

The little handle space on my 2010 allows me to put in the compressed hose and my 90 degree angle. Tight fit but it works. It's surprising how small the hoses compress.

[randy69]

The little handle space on my 2010 allows me to put in the compressed hose and my 90 degree angle. Tight fit but it works. It's surprising how small the hoses compress.

Yes but the hose is nasty why put it in a trailor compartment. Put in a tube or a home made abs pipe. And let it leak and stink there.

[KJcachers]

My Rhino hose and attachments go in Rubbermaid container just big enough to hold them and then into front storage. The hose has end caps so no mess even inside the Rubbermaid box.


Sent from my iPhone using Tapatalk

[tcredeur]

I store mine in a 4" PVC sewer pipe with caps on each end and mounted it right behind the front jacks . Works out perfect for me .

[Me.Bikes.Dogs]

I use end-caps on my sewer hoses and they have never leaked. Maybe I'm just lucky but I've never had a problem. No drips, spills, or leaks.

[jrp]

There are no bumpers on this hauler. I guess you need to make your own? Dont get much for $60000 anymore i guess.

Just be sure your hose end fittings will fit inside the tube. I bought one of the "universal" hanging tubes and my hose end fittings wont fit inside it.

[fla-gypsy]

My Rhino hose and attachments go in Rubbermaid container just big enough to hold them and then into front storage. The hose has end caps so no mess even inside the Rubbermaid box.


Sent from my iPhone using Tapatalk

X2 on the plastic box and Rhinoflex

[tanman32225]

My voltage came with one under the rear but I added another near the waste control panel. I keep the extension hose in the rear and the main hose in the newly installed tube. Camping world sells them fairly cheap and easy to install.

[rs1718]

my 2012 300mp has a small door next to the generator door, the sewer hose goes in there.

[poochy]

my 2011 fuzion 302 te lll has a factory 5" corragated rubber hose covering the still attached sewer hose than connected to a 5" black pvc 16" pipe with a cap than a rubber hanger holds it north/south with the camper if u look up fuzion homepage they show this contrapion hope this helps butch:):)

[Roller4Tan]

:jester: I just store mine in the bumper...Not :jester: