PDA

View Full Version : 2012 327RES Cougar fiberglass laminate let go


coopsloop
08-10-2012, 04:16 PM
My Cougar 5th 327 Fifth 2012 model, onlly a few months old, has what looks like a bubble in the back The laminate has let go. I gather this is a Warranty issue, but what would cause this to happen? Has anyone else had this problem. You can push on it and it moves in whereas the other walls are firm.

SteveC7010
08-10-2012, 05:47 PM
My Cougar 5th 327 Fifth 2012 model, onlly a few months old, has what looks like a bubble in the back The laminate has let go. I gather this is a Warranty issue, but what would cause this to happen? Has anyone else had this problem. You can push on it and it moves in whereas the other walls are firm.

If you will search back a bit, you will find that this has been discussed several times. What you are seeing is normal. Keystone builds the back of the trailers that way.

Ron
08-10-2012, 06:24 PM
X2 the one I had also did this and is normal unless you have the fiberglass back cap that is ridgid like our Montana. Ron

Handysam
08-10-2012, 06:53 PM
Yes normal, it's called a floating wall on the back.